Ubiquiti UniFi G4 G5 Bullet Camera Beam Clamp Mount - Warehouse Trusses

Hang your UniFi Bullet camera from a beam or truss without drilling. This 3D-printed adapter connects the camera's own bracket to a standard 1/4"-20 beam clamp, so you can mount where there is no wall or ceiling to screw into.

What's included

• 1 x 3D-printed PETG adapter plate (black or white)
• 1 x Steel City 500-SC malleable iron beam clamp
• 1 x 1/4"-20 x 1/2" Phillips screw and washer

Camera and the camera's own bracket are not included.

Specs

• Adapter: 60 mm diameter x 20 mm tall, PETG
• Two sets of camera screw holes: 43 mm spacing (G4 Bullet) and 47 mm spacing (G5 Bullet), center to center
• Center hole sized for the 1/4"-20 clamp screw
• Two lanyard holes so you can add a safety cable (cable not included)

Compatibility

Made for the UniFi G4 Bullet and G5 Bullet bracket hole patterns. Other Bullet models may share one of these patterns, but please check your bracket's hole spacing before ordering.

Safety note

Overhead installation is at your own risk. Check that the clamp is seated securely on your beam, and we recommend adding a safety cable through the lanyard holes.

Not affiliated with or endorsed by Ubiquiti Inc. UniFi and Ubiquiti are trademarks of Ubiquiti Inc., used only to describe compatibility.

Mounting guide

View or download the UniFi Bullet Beam Mount Guide (PDF)